Workstation Structural Members
Gusset Brace Assembly
Gusset Brace Assembly used for increasing strength capacity on stations and additional structural arms, tiers and overhead assemblies.
Heavy Duty Gusset Brace Assembly with Aluminum Universals.
ESD Gusset Brace Assembly with Aluminum Universals for ESD Applications.
| Gusset | Standard | Heavy Duty | ESD |
| Small–7″ Large–14″ |
90047 90048 |
90047HD 90048HD |
95047 95048 |
Full Tiers
These precut and assembled components provide the structure to optimize a basic station with a single hex key.
Full Tier Assembly is used when additional horizontal tubes are needed between station rear legs for additional parts presentation display. Complete with mounting hardware
(Aluminum Horizontal Pipe and Two Mounting Joints)
Heavy Duty Version with Aluminum Fittings
ESD Tubing and Aluminum Fittings
| Full Tier | Standard | Heavy Duty | ESD |
| Small–4′ Medium–5′ Large–6′ |
90012 90013 90014 |
90012HD 90013HD 90014HD |
95012 95013 95014 |
Half Tier Assembly
Half Tier Assembly is used when additional parts presentation is required with a 45 º angular sweep. Mount to rear legs of any basic structure. Complete with Mounting Joint and Pipe.
| Half Tier | Standard | Heavy Duty | ESD |
| Small–15″ Large–24″ |
90015 90016 |
90015HD 90016HD |
95015 95016 |
Overhead Assembly
Overhead Assembly is used when mounting an overhead light or tool trolley to a station. The assembly consists of two side pipe arms, one full front pipe tier and joints. Recommend adding 90047 Small Gusset Brace Assembly (2) to connect the overhead to rear station legs for extra support.
| Half Tier | Standard | Heavy Duty | ESD |
| Small–4′ Medium–5′ Large–6′ |
90017 90018 |
90017HD 90018HD 90019HD |
95017 95018 95019 |
