| Even more accessories |
|
|
| |
|
|
Trailer Hitch - #QTH
Steel hitch with Pintle coupling, .25" thick steel is rated for 400 pounds both the tongue and the coupling hitch mount to parallel tubes with 2- #QF 100Q and 2 - #QF1002Q with 8 mm hex cap screws see our caster section for your cart design.
Dimensions: 3" H x 13 1/2" W x 19 1/8" L |
|
 |
| |
|
|
Hangers #QHIL and QHRA
These wire hangers provide a sturdy support to hang parts, cable assemblies, or build sheets. The hook is either in line #QHIL with the tube that it hanging on or at
a right angle. #QHRA. Weight capacity is 25 pounds.
Dimensions: 3.75” Long x 1.5” wide, 95mm x 38mm |
|
 |
| |
|
|
Vesa Mount - QVSA
Standard flat screen mount. 2 pieces for quick removal. Mount comes with 4 QC13 universal fittings for attachment on 2 horizontal tubes. Powder coat finish. |
|
 |
| |
|
|
House Keeping Station #QHKS
Our housekeeping station provides an area for quick storage for your station’s cleaning tools and supplies. The hook and spring loaded handle holder are designed for your brooms, dust pans and brushes. And the cut out provides a storage area for spray cans or bottles. Comes with four QC13 universal fittings for mounting on 2 parallel tubes.
Dimensions: 7” H x 5” D x 6” W, 178 mm x 127 mm x152 mm |
|
 |
| |
|
|
Wire Dispenser #QWP
Use to mount and dispense solder wire, wire, safety wire etc. The drop in rod design makes replenishment and change overs quick. Comes with two QC13 universal
fittings for mounting on a horizontal tube.
Dimensions: 3” H x 7” D x 8” W, 178 mm x 127 mm x152 mm |
|
 |
| |
|
|
Rollers
This modular roller system can be used to quickly implement line side parts presentation of tote boxes and containers. Modular design makes adding lengths as simple as pushing in a plastic expansion rivet. High impact plastic construction provides easy placement and eliminates corrosion issues. Low resistance ball bearing design insures effortless container flow. 50# capacity per roller.
Dimensions 18.75” W x 4.25 Center x 2.88” High 476mm W x 108mm C x 73 mm H Roller diameter 1.88”, 48 mm |
|
 |
| |
|
|
Pneumatic Torque Tool Holder
This tool holder mounts with two wood screws to the
underside of a work surface, thereby saving valuable work
area space. Angled presentation design provides ergonomic
tool deployment. UHMW design protects tool finish
and minimizes wear.
Front to back dimensions: 12" (305 mm), hole diameter 2.5” (63.5 mm) |
|
 |
;)
;)
;)
;)
;)
;)
;)