Accessories
Worksmart Systems® has an extensive selection of workstation accessories for use on our transport and floor stations that are designed to increase productivity and worker comfort. Here is a sample of some popular items.
Status Light
Andon Status Light
#90076
Our three-light Andon tower is used to alert the manufacturing team of quality issues, stock outs, Kan Ban status and more. Comes with a 3-position switch and fittings to mount on a workstation leg.
Outlet Strip
Workstation Light Assembly
#90037
Worksmart®’s 4-foot light module mounts at the top of the workstation providing bright, even illumination across the work surface. It uses 1 standard 48″ 32-watt lamp. Supplied with off/on switch, 3-wire cord, snap-in lens and all mounting hardware. Operates on 120 volt AC.
Outlet Strip
Outlet Strips
Our four (#90038) and eight (#90039) receptacles, industrial grade power strips with off/on switch, re-settable thermal overload protection and 3-wire, eight foot cords provide outlets for power tools and other devices. Includes all mounting hardware.
Flo Thru Bar Assembly
Flo-Thru Bar Assemblies
Small, #90029. Large, #90030.
This unique 2 Bin KanBan system helps prevent stock outs. Remove the empty bin and the second one slides into place. Empty bins signal parts handlers when refills are needed. Two assemblies required. Total weight capacity is 25 lbs.
Bin Rail Assemblies
Bin Rail Assemblies
Small, #90031. Large #90032.
Use on full and half-tiers with our molded clip-on plastic bins. Weight capacity is 24 lbs for the small and 50 lbs for the large. Sizes 21″ and 40″ long.
Support Bar Assemblies
Support Bar Assemblies
Small, #90025. Medium, #90026. Large, #90027.
Used to support equipment, monitors, shelves and large bins, tote boxes or cardboard containers. Two required. Carrying capacity is 50 lbs per pair. Small, 7″; Medium, 14″; and Large, 19″.
Molded Plastic Bins
Molded Plastic Bins
Use with Flo-Thru Bars and Bin Rails. The standard bin color is blue and the ESD color is black.
Shelves
Shelves
Small, #90523. Large, #90524.
Provide additional work surfaces or can be used to hold parts bins, tooling or documentation. Shelves are sheet aluminum and come in 20″ and 39″ lengths. Both are 14″ deep. Load capacity is 25 lbs and 100 lbs respectively. Supplied with universal mounting fittings.
Tool Trolley Assembly
Tool Trolley Assembly
#90041
Use to hang air or electrical torque tools from an overhead support module on a movable slide. Weight capacity is 10 lbs.
Tool Hanger Assembly
Tool Hanger Assembly
#90042
Use to hang air or electric torque tools from a fixed-point overhead.
Clip Assembly
Clip Assembly
#90045
Used to hold documentation in position so an assembler may easily refer to instructions.
Tool Holster Assembly
Tool Holster Assembly
#90043
Use to hold heavy tools such as pistol style air guns. Capacity is 15 lbs.
Drawer
Drawer
#90046
Single ABS plastic locking drawer mounts under work surface. Dimensions are 14.2″ wide x 15.25″ long x 6″ deep. Available in black or white.
FRL Bracket Assembly
FRL Bracket Assembly
#90050
Use with air systems to support a Filter/Regulator/ Lubricator Unit.
Stainless Steel Tool Rack
Stainless Steel Tool Rack
Casters
Casters
#90275
Worksmart Systems® provides 5″ casters to make your workstations mobile and easily moved to where it’s needed. Load carrying capacity is 150 lb per wheel.
Foot Rest
Foot Rest
#90075
Designed for worker comfort, our 12″ x 10″ footrest assures safety and optimum comfort. Adjusts for height, angle and depth. It also tilts 15-20 degrees and is covered with non-skid corrugated rubber. Complete with all fittings and tubes.
Sit Stand Stool
Sit Stand Stool
#20000
Hydraulic lift operated seat has a height range from 20.5″ – 30.5″. Epoxy coated five-leg base sits on non-skid glides. Can be utilized at standing height to allow operators the option of sitting or standing. Seat is adjustable for tilt.
Operational Seating
Operational Seating
#20001
Our top of the line chair adjusts for seat height, seat angle, back height and back angle. Comes equipped with 2″ casters. Seat height range is 21.75″ – 31.75″.
Fittings
Customize your stations with addition fittings. Our tubing is available in one foot increments. Please inquire.
Tee Fitting #90054
Split Tee Fitting #90054S
Universal Fitting #90053
.125 End Plug #90056
Knob Assembly #90057
Mounting Bracket #90052
Vinyl Foot #90089
Aluminum Straight Track Joiner #90080
Aluminum Tee Fitting #90054SA
